Lolo National Forest

This permit allows you to cut a Christmas Tree within the Lolo National Forest! Lifelong memories are built during these special times and we are happy to help with any information gathering you'll need to make this trip a safe and enjoyable one.  Please be sure to read and agree to all the tips and guidelines when selecting your tree. Follow all road and motorized trail restrictions on the Motor Vehicle Use Map . Visit the Lolo National Forest website for more, including contact information and how to obtain a Christmas tree permit at your local District office. - Do not cut trees within the Blue Mountain and Pattee Canyon Recreation Areas or the Rattlesnake National Recreation Area. - Do not cut trees on private land, in wilderness areas, designated recreation sites, previously thinned areas, or existing tree plantations. - Do not cut trees visible from major roads, within 150-feet of streams and creeks, or in other well-used areas. Tree Height: 12 feet maximum Stump height: 6 inches maximum Take the whole tree. Cutting the tree top off is prohibited. If snow is on the ground, remove it from around the stump so you can accurately measure the stump and tree height. Cut branches off the stump and scatter them. Your permit allows you to cut Christmas trees on the Lolo National Forest, with the exception of locations described below. Make sure you cut your tree on public lands by checking a Lolo National Forest Visitor Map and follow road restrictions on the Motor Vehicle Use Map. Do not cut trees in the Blue Mountain and Pattee Canyon Recreation Areas or the Rattlesnake National Recreation Area. Do not cut on private land, in wilderness areas, designated recreation sites, previously thinned areas, or existing tree plantations. Do not cut in active timber sales or areas that have been planted with new trees. Do not cut trees visible from major roads, within 150-feet of streams or creeks, or in other well-used areas. Please post your permit on your dash. Carry your tree carefully out of the woods. Dragging the tree will rub off needles and bark. If the tree is too big to transport inside of your vehicle, wrap it in canvas to prevent wind damage. Once home, cut the bottom of the trunk off and place the freshly cut trunk in a bucket of water. Replenish water. If storing your tree outside for a few days before putting it in the house, keep it in an area protected from the wind, such as the north or east side of your house or under a shaded tree. Tools you might want to consider bringing with you include a measuring tape to ensure you select a tree that fits in your home; handsaw to cut your tree; gloves to protect your hands; boots to protect your feet; a tarp to sit on and/or to move your tree once it's cut; and rope or straps to secure your tree to your vehicle. Choose a tree from a dense forested area, which will give the remaining trees more space to grow. Before you leave home, be sure to measure the space where you plan to place the tree in your home (height and width) and measure the space in your vehicle where you will be transporting the tree. Cell service may be spotty or unavailable. Be sure someone knows where you are and when to expect you back. Check the latest weather conditions, forest warnings and road closures before you leave on your trip. Bring a map with you. Don’t rely on GPS because it may not be up-to-date with forest service roads. Dress warmly and take extra dry clothes. Expect winter weather, including cold temperatures, snow and wind. Roads may not be plowed. Carry tire chains, shovel(s) and a tow chain. Be sure your vehicle has a full tank of gas. Bring a spare key and give it to someone else in your party. Don’t get locked out of your car! Park in areas so that traffic can get by safely, and do not block gates. Bring plenty of food and water with you as well as an overnight survival kit in case you become stranded. Start your day early. Be sure to find your tree and leave the woods before dark.